slickteggyGSR
New Member
In desperate need of help!!!! Just put a JDM GSR trans on my 99 ls along with a new exedy oe clutch kit, we finished putting everything back together today and when were trying to losen the locking pin on the clutch pedal, it just spins with the nut and we can't adjust it, I don't know if the pedal being at 51/2 when it's supposed to be at 61/2 would cause the clutch to totally not engage at all. When I put the car in gear it does nothing other than rev.I took the boot off of the master cylinder to see of it was working and it pushed the forks in like it should, so now I'm completely lost. Any suggestions would be helpful!