Computer and distributor???

91lsvtecDA9

New Member
What computer and distributor will I need for a lsvtec conversion for a 91 integra? Is there already a thread for lsvtec parts needed?
 

evilminion88

I ate the bones
As for the distributor, you can use ur B18a1/b1 dissy on the vtec head (if it works properly, and is OBD1). Just cut off the third leg of the dissy (it won't fit on the head otherwise) because there is only 2 bolt holes on the head for a B18C/B16 dissy which only uses 2 bolts to hold the dissy on. If your teg is OBD0, you'll need a OBD1 dissy, and conversion harness to connect the OBD1 dissy to your OBD0 engine bay harness. And like the very informational link Tam provided said, use a ECU according to the head your using. If your using a B16 head use a B16 ECU, B18c1/5 head, B18c1/5 ECU.
 
You must log in or register to reply here.
Top