Do I need motor mounts?

[MTteg]

I know I have written a million questions, but I have more. When I really kick it down, its seems like the motor flexes alot in the bay and you can feel it in the shifter. Its not terrible, but it keeps me from going up to redline because I dont want to mess it up. Is this normal for a gsr, or do the motor mounts get bad sometimes. I plan on getting this car to a place where its tight. This is my project and my daily driver. Thanks

 

[TheSickestDC2]

try moving the motor with your hands and if it moves a decent amount then you probably need a motor mount(s)

 

[jdmjim]

yeah, the mounts on the frame rails tend to break

 

[TheSickestDC2]

yeah, the mounts on the frame rails tend to break

yeah and the one in the back because they are the 3 torque mounts if i were you i would replace then and buy polyurethane inserts for them

 

[Cheesenip]

or, go to the how-to section and look at my how-to for filling stock mounts

 

[TheSickestDC2]

or, go to the how-to section and look at my how-to for filling stock mounts

is this just as good as the polyurethane inserts?

 

[MTteg]

Thanks guys, I have had accords before but this is my first integra, and it needs some work. I am glad I found this forum!

 

[TheSickestDC2]

Thanks guys, I have had accords before but this is my first integra, and it needs some work. I am glad I found this forum!

there is alot of help here glad you like it goodluck

 

[GSRMarris]

i had to replace my rear engine mount. it was completely ripped awa from the metal. When i did i put in Energy suspension Inserts that i picked up from Summit Racing. They are pretty sweet, reduce wheel hop substantially.

 

[Ominous G2]

is this just as good as the polyurethane inserts?

It's basically the same thing, just cheaper.

 

[wite2nr]

I would just get an aftermarket rear torque mount if the other 2 mounts are still good.