BankiBoi Member Nov 6, 2011 #1 I need to replace my ect, that controls my temp gauge but I can't remove it with a 24 mm socket, any other way to do this besides a grinder!
I need to replace my ect, that controls my temp gauge but I can't remove it with a 24 mm socket, any other way to do this besides a grinder!
Black teg Catch me if you can Nov 7, 2011 #2 It should come out no problem with a socket. You don't want to grind it off and then drill it out, because you'll get shaving all inside the cooling system. Make sure you have the right socket and the right depth to it.
It should come out no problem with a socket. You don't want to grind it off and then drill it out, because you'll get shaving all inside the cooling system. Make sure you have the right socket and the right depth to it.
BankiBoi Member Nov 7, 2011 #3 Tried it but its not coming off I feel like its stripped. Sent from my ADR6400L using Tapatalk
BankiBoi Member Nov 7, 2011 #5 Doesn't it fit inside a but to screw in? Sent from my ADR6400L using Tapatalk
