Having starting issues

[sps21112]

Hey guys i just had to do some head work on my 95 ls. One of my valves was chipped so i replaced it had the head milled and a valve job done. i replaced all the gaskets, the timing belt, water pump and belt tensioner. All the timing marks line up but when i try to start the car it just turns over. I did a spark check and im getting spark. Im getting fuel pressure but i dont know if my fuel injectors are firing. How do i check this? And any other suggestions?

 

[ari_one]

I'd go back and verify that the marks on the cams are still on and not off by a tooth. How did you verify that your distributor is set correctly?

 

[bardahl]

To make sure your getting power to your injectors use a noid light