How Garrett explains turbos

konerri

New Member
I was doing a lot of research on turbos(now that my build is going to be turbo feed) and which is better for my setup and I stumbled on to this from Garrett. Very good information for many people; beginner or expert. This is a well explained "how to" choose your turbo. They also compare different engines to different turbos. Let it be warmed that there are a lot of equations in the last tech part but if you completely understand it at the end, it does answer about 90 percent of all turbo question.

Turbo Tech 101 ( Basic )
http://www.turbobygarrett.com/turbobygarrett/tech_center/turbo_tech101.html


Turbo Systems 102 (Advanced)
http://www.turbobygarrett.com/turbobygarrett/tech_center/turbo_tech102.html


Turbo Tech 103 (Expert)
http://www.turbobygarrett.com/turbobygarrett/tech_center/turbo_tech103.html


Someone should sticky this
 

dc2GS-R

Super Moderator
I forgot all about this. This is in the FAQ in the FI section

I actually have a spreadsheet that I made while shopping that correlates to the turbo tech 103. It allows you to plug in your desired values and factors and spits out the necessary info to plug into compressor maps. It will calculate MAP requirement, MAF @ HP peak, MAF @ torque peak, pressure ratio and necessary injector size.

I just don't how to post an Excel spreadsheet in vB.
 


Last edited:
You must log in or register to reply here.
Top