sylvaner01
New Member
Hey bros, I wanted to change my CV axle on my da9 and had a bit of trouble, so here is what I did.
First watch this video, Eric explains pretty much everything:
http://www.youtube.com/watch?v=jydxpsh13WQ
To get the lower control arm and balljoint loose use this technique:
http://www.tuner-junction.com/TJForum/honda-suspension-chassis/5158-lower-control-arm-ball-joint-removal-trick.html
This replacement is very easy, the average person can do it in around 3 hours for both.
Hope this helps anybody in the future that needs to change their axle.
Also, make sure you change both at the same time because when I changed the axle which I thought was okay it turned out to be completely destroyed on the inside and would hardly move haha..
Thanks.
First watch this video, Eric explains pretty much everything:
http://www.youtube.com/watch?v=jydxpsh13WQ
To get the lower control arm and balljoint loose use this technique:
http://www.tuner-junction.com/TJForum/honda-suspension-chassis/5158-lower-control-arm-ball-joint-removal-trick.html
This replacement is very easy, the average person can do it in around 3 hours for both.
Hope this helps anybody in the future that needs to change their axle.
Also, make sure you change both at the same time because when I changed the axle which I thought was okay it turned out to be completely destroyed on the inside and would hardly move haha..
Thanks.
Last edited: