I need help with my wiring

[Ping@Ling RHD]

Hi every one I have 94 integra obd1.but I converted it to rhd I have the the rhd engine harness and pick up the friwall harness to witch is obd2a but I have ond1 cabin harness can it steel work cuz the color of the wire don't match up... But I have a obd2 cabin harness off of a 97 integra witch I trow in and I us the plug off of a obd1 cabin harness and most of the wire are color match so I splice them and sodered them to getter so it plug and play but the wire color from the fire wall don't match the usdm97 colors....iam frustreded and about to burn my car to the grown can any one help me

 

[Merlins Beard]

Look for some wiring diagrams, figure out what each wire is for on each harness. Then you will have to start matching and splicing wires.
There is a chance that different colored wires will do the same thing. There are also some wires or connectors that will not be used.

Do you live in Michigan by any chance?

Sent from my Batphone

 

[Ping@Ling RHD]

Naw. I live Incali

 

[Amiguel6]

"Going to burn my car to the ground"....wtf? Haha