Is it safe to use Acura Integra GS-R caliper pins on GS model?

[K3Ntegra]

Is it okay to use Acura Integra GS-R caliper pins on GS model?

I bought, these, and unfortunately I didn't pay close attention to the "PROFESSIONAL GRADE - TYPE R" subtitle.
http://www.amazon.com/gp/product/B000C75KJM?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

The pins seem to match the length of these pins perfectly: http://www.amazon.com/gp/product/B000C9G2AQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00

The new Cardone rear braking bracket I got has a very narrow caliper pin, and I struggled a bit to get the pin to rotate 360 degrees. I got another set of the Raybestos because of the hex head.

Can I use it without worrying too much?

These will be used on the rear brakes only.

The thread length of the Raybestos and AC Delco match. The AC Delco screw goes into the Raybestos pin, comfortably.

 

[Muckman]

Id be shocked if there was any difference. Let us know.

 

[Samurai_Blue]

all integra calipers are the same except itr, which is the same with every other honda except the legend 2 pot and the nsx

 

[renarudo]

Should be good. GSR/RS/LS/SE brake components are all the same. Like Samurai Blue said the only one that would be different is ITR due to the increased size of the rotor and caliper.