Lug nuts

[gsr_nikhil]

Can someone clarify terms for me? Seems everyone uses acorn, ball seat, or conical shapes interchangeably and I'm getting confused. What lugs do you use with RPF1's?

Sent from my Moto seX using Tapatalk

 

[Samurai_Blue]

Any aftermraket lug nut.

Dont be a bitch and get aluminum lugs either. Steel or go home

 

[gsr_nikhil]

Any aftermraket lug nut.

Dont be a bitch and get aluminum lugs either. Steel or go home

Damn. Wish I hadn't bought Rachel's lol. They're forged al

But what kinda seat is best?

Sent from my Moto seX using Tapatalk

 

[jbrown97ls]

Any aftermraket lug nut.

Dont be a bitch and get aluminum lugs either. Steel or go home

I want the buddy clubs real bad.

 

[94RS]

I want the buddy clubs real bad.

Aren't the Buddy Clubs aluminum....?

 

[Samurai_Blue]

Damn. Wish I hadn't bought Rachel's lol. They're forged al

But what kinda seat is best?

Sent from my Moto seX using Tapatalk

aluminum is cool if you remember to check the torque once in a while. they strip easily too. You lug seat must match the wheel seat. You are fine with what you have its more for putting ford wheels on your integra.

Aren't the Buddy Clubs aluminum....?

steel i use them

 

[gsr_nikhil]

aluminum is cool if you remember to check the torque once in a while. they strip easily too. You lug seat must match the wheel seat. You are fine with what you have its more for putting ford wheels on your integra.



steel i use them

So the ones I bought from Rachel will work on RPF1's? Will they work with my current blades?

Sent from my Moto seX using Tapatalk

 

[g3teg97]

Found this link: http://www.brandsport.com/howdoifirilu.html

Step 3 says Honda is usually ball seat.

 

[gsr_nikhil]

Found this link: http://www.brandsport.com/howdoifirilu.html

Step 3 says Honda is usually ball seat.

Thank you

Sent from my Moto seX using Tapatalk

 

[jbrown97ls]

They do sell adapters that enable acorn lug nuts to work on wheels with ball seats.

 

[94RS]

steel i use them

I was looking at the P1 lug nuts.

 

[Ted's Owner]

http://www.summitracing.com/parts/enk-3795704935sp/overview/
It says here to use conical seat - 60 degree lug nuts.

 

[bkirshr]

OEM wheels have a ball seat, while most aftermarket wheels have 60* taper seats. If you are using RPF1's, they will probably have a 60* taper, so use 60* taper lug nuts.

 

[gsr_nikhil]

OEM wheels have a ball seat, while most aftermarket wheels have 60* taper seats. If you are using RPF1's, they will probably have a 60* taper, so use 60* taper lug nuts.

Thanks, Ben!

Sent from my Moto seX using Tapatalk

 

[Samurai_Blue]

oem lugs go with oem wheels
aftermarket lugs go with aftermarket wheels