Maintence Day

bradster101

New Member
So tomorrow my friend and I are going to do the works to my teg

Going to swap all the old fluids for new (bleed clutch, brakes, abs, etc....)
Maybe change the rotors if I can get them and pads

So my question is what all do I need to have in order to be prepared to bleed and flush the brakes? clutch?
Any problems I might run in to? (for those who have done this)

Thanks in advance

EDIT: yes I know I spelled that wrong.... its Maintenance
 

bcartwright88

New Member
I replace my slave cylinder today. and having troubles bleeding my clutch. The clutch pedal is on the floor and wont bounce back. Stay tuned tomorrow for the end result and info on how I fixed it.
 

bradster101

New Member
yea Ive heard that you just pull it back up after you add fluid and close the valve to avoid letting air in.... then its good. Im trying to find a diy now
 

bcartwright88

New Member
Ive done just about everything you can do to get pressure back in... it sat for a whole day in the garage

//tear
 


bradster101

New Member
yea that should help... Im hoping I can get to it tomorrow or sometime this week, didnt have time today

And you still never got any pressure back?
 
You must log in or register to reply here.
Top