Motor mount problem

[96LSteg]

I replaced my motor mount with OEM motor mounts and my motor still moves more than I like it too. Any ideas as far as what I can do? I know there is going to be some movement but not as much as I'm getting...


Sent from your mom's room using Tapatalk

 

[Samurai_Blue]

which motor mount?

 

[96LSteg]

Driver side and rear


Sent from your mom's room using Tapatalk

 

[Samurai_Blue]

rear might be broken again. use energy inserts. Usually that helps with it rocking back and forth.

 

[96LSteg]

Ok.


Sent from your mom's room using Tapatalk

 

[96LSteg]

So new motor mounts can crack as soon as you put them in?

 

[Samurai_Blue]

depending if they were installed wrong

 

[96LSteg]

What would be the correct way to install one? I thought it was as simple as attaching it to the bracket on the motor and setting it in the pocket and running the screw through it (for the driver side) and putting the rear motor mount on the frame and lowering the motor and running the screw in (according to all torque specs of course). Am I wrong?

 

[Samurai_Blue]

yeah thats the right way, how much is it moving? Does it rock hack and forth if you use just your hands?

 

[96LSteg]

It only rocks back and forth when I shift gears. Usually from first to second. I can hear what I think is that T brace hitting the frame...

 

[Samurai_Blue]

check the tranny mount

 

[96LSteg]

That's what it looks like...


Sent from your mom's room using Tapatalk

 

[Samurai_Blue]

wait when you say driver side mount are you talking about the upper or lower

 

[96LSteg]

Upper

 

[96LSteg]

And the rubber feels pretty squishy and soft