My 95 integra

[nayy]

Hey everyone om new to ci and hopeing to gather some infor on my integra, ive had it for about months and it drives great but needs some tlc, has 169k on it but. is more than reliable. I changed the thermostat on it today and was looking around under the hood and noticed a plastic piece on the side of the valve cover that looks like a plug and has a crack and leaking a small amount of oil, is this something that I can just pull out and replug or is it something I have to replace a mechanical part to? Im not the best with cars but I am slowly learning alot, I work at the local autozone so that helps a ton im very mechanicaly inclined but as fas as how the parts work together im still new to it hoping to learn alot from you guys thanks in advanced
Heres my car by the way, and a pic of the part I need help with, open to any suggestion on helping it look nicer too

 

[94RS]

That's the cam seal that's leaking. They all do that at some point because they're plastic. We have a member on here that sells billet seals for cheap. Blanks and engraved, although those tend to take longer.

Here's his thread
http://www.clubintegra.com/board/showthread.php?t=78843

This is the one he did for me.
https://flic.kr/p/qDPmT4


Basically to replace it, pull the valve cover, the two bolts on the outside and two bolts on the piece holding the camshaft down. Pull out the plastic one, replace with the new one, reinstall what you pulled off. Done.

 

[nayy]

Ok thanks for the info, I came across the parts for sale thread literally right after I posted and saw the one he made for you there and he has a lot of people vouch for him so ill have to check him out I was worried it would be something mechanical instead it turns out its just a seal thanks!