Need a Hondata s200 USB cable

[5150KDC2]

Hey everyone, I need a hondata s200 USB cable. I will buy it if some one has a spare hanging around or no longer needs it. The guy I bought the car from had put the hondata in there, and the shop he took it too tuned it way to rich. I just need to lean it out till i have the money to buy an AEM ECU. I have the programing and everything, I just need the cable.

Thanks
Mike

 

[Prozon]

I believe a printers USB cable is the same as Hondata's.

Edit:
That's what I've heard, could be wrong though.

Also have you tried eBay?

 

[5150KDC2]

Thanks I will give that a shot and see how it works. I have looked on Ebay and Craigslist, there was nothing on either last time I checked. Hopefully the printer USB will work. Much apreciated

 

[Hawkman13]

I have a Hondata s300 and a standard printer USB cable works perfect for me. Looks just like this

 

[Hawkman13]

Just looked into it and there different. Looks like you need a special cable from Hondata. It looks like you need a Romeditor 4 which is around $195
http://www.locashdyno.com/store2/index.php?main_page=product_info&cPath=1_17&products_id=299

 

[5150KDC2]

OUCH!! They are proud of that cable. Gonna have to work for now though. Thanks for the link and the info.

 

[DailyDB8]

thats a rip-off. go get a serial cable to usb port

s300 used the printer cable to usb port

 

[nathan_carmona]

http://cgi.ebay.com/USB-RS-232-DB9-9-PIN-SERIAL-CABLE-W-FEMALE-ADAPTER-/270769860589?pt=LH_DefaultDomain_0&hash=item3f0b242fed#ht_2625wt_1141

 

[Hawkman13]

I thought any serial to USB cable would work. But than I looked into it and Im not sure if thats the case.
http://www.hondata.com/forum/viewtopic.php?t=10254

And according to this its not as simple as just plugging it in like the s300. According to this you need the romeditor.
http://www.hondata.com/s200.html

 

[5150KDC2]

Thanks everyone, now that I know its not a propriatary cable it should be easy to find since I dont need the program.