Need help asap, axle fell out when installing coilovers

[forrest12]

I am installing coilovers and i had to push the wheel down in order to get the old strut out and it wont go back up to the right position now. I think the grove in the axle slide out when i pushed it down. how to i re-aline it?

 

[ixcocoyxi]

make sure you have the whole front up. both wheels. the sway bar will push up on the side thats being lifted.

as for the axle, its easiest to put back by removing the castle nut ond separating the lower control arm

 

[forrest12]

make sure you have the whole front up. both wheels. the sway bar will push up on the side thats being lifted.

as for the axle, its easiest to put back by removing the castle nut ond separating the lower control arm

I cant get the lower arm to come off the axle its stuck..

 

[Tam4511]

The lca shouldnt be attached to the axle... Get pics

 

[forrest12]

I cant get it to slide back in because the controle are is keeping me from moving at all. Pluse i Got the nut off the bolt on the controle arm but i cant get it to come off now. Its stuck
<a href="http://s286.photobucket.com/albums/ll114/Rodes1216/?action=view&amp;current=IMG_1768.jpg" target="_blank"><img src="http://i286.photobucket.com/albums/ll114/Rodes1216/IMG_1768.jpg" border="0" alt="Photobucket"></a>
<a href="http://s286.photobucket.com/albums/ll114/Rodes1216/?action=view&amp;current=IMG_1767.jpg" target="_blank"><img src="http://i286.photobucket.com/albums/ll114/Rodes1216/IMG_1767.jpg" border="0" alt="Photobucket"></a>

 

[forrest12]

 

[forrest12]

Got the arm off and now i cant seem to get the axle back. it keeps slipping so im guessing its not in right...