joserivera New Member Feb 9, 2014 #1 So I need help removing a 2000 integra passanger side axle. It's stuck in the spindle. Any suggestions on how to get it out? Thanks for any help.
So I need help removing a 2000 integra passanger side axle. It's stuck in the spindle. Any suggestions on how to get it out? Thanks for any help.
Theasian New Member Feb 9, 2014 #2 Lots of wd40 get a big chisel with a tapered end to fit inside the hole on the axle. Get your bfh and hammer away. Keep soaking in wd40 or on blaster w.e really it will eventually come out
Lots of wd40 get a big chisel with a tapered end to fit inside the hole on the axle. Get your bfh and hammer away. Keep soaking in wd40 or on blaster w.e really it will eventually come out
osiris19 Active Member Feb 10, 2014 #4 Did you remove the lower ball joint from the control arm and the tie rod? Sent from my Nexus 7 using Tapatalk
Did you remove the lower ball joint from the control arm and the tie rod? Sent from my Nexus 7 using Tapatalk
