Need Help with Alarm install

[samace_sg]

I started my alarm / remote start install and ran into some wiring issues. Does anyone have a write up or anyone work at Best Buy or Circuit City that has access to the wiring diagram for and 96 Integra?

 

[patrick4588]

Wire/Function Colour Location/Description Polarity Notes Photos Diagrams
12 VOLTS White Ignition harness +
IGNITION Black/yellow Ignition harness +
ACCESSORY Yellow Ignition harness +
STARTER Black/white Ignition harness +
KEY SENSE Blue/white Ignition harness -
TACH SIGNAL Blue At coil on engine AC
LOCK Black/white In driver's kickpanel -
UNLOCK Black/red In driver's kickpanel -
DOORPIN Lt.green/red In driver's kickpanel -
HOODPIN Yellow/red See notes -
TRUNK PIN Green In driver's kickpanel -
TRUNK RELEASE Manual release
FACTORY ARM See notes
FACTORY DISARM See notes
BRAKESWITCH Green/white At switch above brake pedal +
PARKLIGHTS Red/black At plug on fusebox +
HAND BRAKE Red/green In DKP or at Fusebox -
HORN Green/blue At steering column -
DRIVER WINDOW UP Red/blue At switch in driver's door REV POL
DRIVER WINDOW DOWN Red/yellow At switch in driver's door REV POL
PASSENGER WINDOW UP Blue/green At switch in driver's door REV POL
PASSENGER WINDOW DOWN Blue/yellow At switch in driver's door REV POL
LEFT REAR WINDOW UP Yellow/green At switch in driver's door REV POL
LEFT REAR WINDOW DOWN Yellow At switch in driver's door REV POL
RIGHT REAR WINDOW UP Yellow/green At switch in driver's door REV POL
RIGHT REAR WINDOW DOWN Yellow At switch in driver's door REV POL
HEADLIGHTS Red/white At light switch harness +
REVERSE LIGHTS Green/black DKP in harness to back of vehicle +
DIMMER Red At dimmer switch harness
VSS WIRE Orange On driver's strut tower

 

[samace_sg]

awesome.. you the man..

 

[patrick4588]

yeah thats what they tell me. lol

 

[samace_sg]

another quick question...

I installed the alarm, broke the shock sensor but im replacing it with a motion sensor .. everything seems to be working but i don't seem to have the "ignition unlock" feature. did i miss a wire?

 

[TegSox]

That is usually a programmable feature that you can set to on or off. There isn't an extra wire for it. But what does ignition unlock have to do with a motion sensor? What brand/model remote start are you installing?

 

[samace_sg]

Viper 5900 ... sensor has nothing to do with it. I only ask about wire because I dont remember installing any wire to ignition so how does the alarm brain know when the car turns on or off?

 

[TegSox]

Ignition power for the brain is through the ribbon cable that runs from the Relay Sattelite to the Brain. Your asking how the brain knows when the ignition is on or off?, or if the engine is running or not. It'll know if the engine is running or not through the tach wire. You can get tach signal behind the cluster btw, one less wire to run through the wall and engine bay. It's the blue wire coming out of the harness closer to the tach side of the cluster.
I'm going by my Avital 4400 install manual for info on how your Viper hooks up. They are both DEI product, and both alarm/remote start combos, so the way they hook up should be nearly identical. I like your blue remote better than mine, lol.

 

[samace_sg]

Thanks man.. will double check my wires then..

i like the blue too.. but i think im gonna buy a python remote since its black