Filipe
New Member
Hi there..
I have
1991 Integra
A/T
B18A1
I have a problem..
Im going to make a new paint job and i have the car stopped a few weeks to disassemble...
Today i out the car working for about 20 minutes...
Everything ok... No noises... No high temperature... No error in the ECU..
Nothing...
Worked about 20 minutes...
Then turn the engine off...
Passed about 2 hours...
I go again to start the engine to take out of the garage to the truck to go to the workshop...
Turn the key again... No ECU error... Nothing...
The battery is ok..
But the car won't start
:???::???:
I turn the key and i hear a click but the engine doesn't even turn...
Can be possible that the starter gripped????
I appreciate any help if possible ...
Thanks...
I have
1991 Integra
A/T
B18A1
I have a problem..
Im going to make a new paint job and i have the car stopped a few weeks to disassemble...
Today i out the car working for about 20 minutes...
Everything ok... No noises... No high temperature... No error in the ECU..
Nothing...
Worked about 20 minutes...
Then turn the engine off...
Passed about 2 hours...
I go again to start the engine to take out of the garage to the truck to go to the workshop...
Turn the key again... No ECU error... Nothing...
The battery is ok..
But the car won't start
:???::???:
I turn the key and i hear a click but the engine doesn't even turn...
Can be possible that the starter gripped????
I appreciate any help if possible ...
Thanks...