Wire4001 New Member Jul 15, 2013 #1 Just wondering just how tight the banjo bolt needs to be on the engine side of the filter. When i took off the old one it was very very tight and im wondering is there an official torque spec for it ?
Just wondering just how tight the banjo bolt needs to be on the engine side of the filter. When i took off the old one it was very very tight and im wondering is there an official torque spec for it ?
Samurai_Blue Yolo Whippin' Jul 15, 2013 #2 big banjo bolt 16 foot pounds the little service bolt 11 foot pounds http://www.team-integra.net/forum/blogs/elmn8r/112-g3-fuel-filter-replace.html
big banjo bolt 16 foot pounds the little service bolt 11 foot pounds http://www.team-integra.net/forum/blogs/elmn8r/112-g3-fuel-filter-replace.html
Wire4001 New Member Jul 15, 2013 #3 thanks i was waiting on that, and for sure that thing was way higher than that when i took it off.
