Replace your tail light seals - How to

K3Ntegra

Member
Thanks for the guide.

Unfortunately I'll need to use RTV to seal certain parts of the gasket. Still getting leaks, with these 'lorettafillmores'.

Thankfully I only replaced the side that was leaking, instead of both of them.

Worst of the leak happened ABOVE the oval/circled area of the inner part of the old gasket, towards the right.



 
Last edited:

94RS

No fucks given.
K3Ntegra said:
Thanks for the guide.

Unfortunately I'll need to use RTV to seal certain parts of the gasket. Still getting leaks, with these 'lorettafillmores'.

Thankfully I only replaced the side that was leaking, instead of both of them.
Click to expand...

Did you make sure to push the taillight while tightening the nut all the way?

I put those gaskets on both sides of mine in early 2014 and haven't had a leak since. It was a pain in the ass to get the taillights back in though since they're way thicker thank stock gaskets.
 

K3Ntegra

Member
94RS said:
Did you make sure to push the taillight while tightening the nut all the way?

I put those gaskets on both sides of mine in early 2014 and haven't had a leak since. It was a pain in the ass to get the taillights back in though since they're way thicker thank stock gaskets.
Click to expand...
I'll keep that in mind when I re-do mine. I hope I don't end up like this guy.
https://www.youtube.com/watch?v=IyI032bEJKM
[YOUTUBE="https://www.youtube.com/watch?v=IyI032bEJKM"][/YOUTUBE]
 

Ganyon

Active Member
94RS said:
Did you make sure to push the taillight while tightening the nut all the way?

I put those gaskets on both sides of mine in early 2014 and haven't had a leak since. It was a pain in the ass to get the taillights back in though since they're way thicker thank stock gaskets.
Click to expand...
Same. My integra never leaked after that.
 
You must log in or register to reply here.
Top