rewiring fog lights switch

[cmoney176]

how do i get my fog light to come on when i want them to. i have bought a seperate switch but dont want a bunch of wires every where. can anyone help me?

 

[Vince92Gs]

You don't need a new switch. You can use your existing fog light switch and wire it into one of your free slots on your fuse box. Do a quick search for how to do it, and which free slot to use. That's the safer way to do it. Other ways will tell you to splice into say your rear defrost switch, which could potentially put too much load on the wiring causing it to overheat and melt, potentially causing a fire.

**Edit**

Here, even did the search for you.

http://www.clubintegra.com/board/showthread.php?t=13286&highlight=foglights

 

[Rich-PMS]

Dude, it takes litterally 2 minutes!!!

You take 1 wire from the fog switch, tap it into a wire on the defroster switch. And you're done.

There's a write up on g2ic.com

 

[Rich-PMS]

http://forums.g2ic.com/tegtips/lighting/1.html

 

[paoloDa92]

easy stuff man. )

 

[cmoney176]

well i tookj the time to look at diffrent recommendations and went with the rear defroster splice and it works well. i did test all wires for over loads first and im happy to say that all is well. Thanks to all that commented!!

 

[paoloDa92]

yeah thats what i did too. cause thats the easiest one in my opinion.

well good job dudd!

 

[92_JDM]

hey do u mind showing me how to do that as will?
if u can picture are helpful but if words is you got
then i appreciate that as will.. Thanks