rexpepper123
Active Member
so today i was bored an thought hey lets make a hood latch block off plate. i wasnt satisfied with the one i saw in the team integra diy so i made my own out of some thick metal i had laying around.. i popped off the front bumper and removed the latch. ( 3 10mm bolts) did some welding an bent a lil metal had a beer or 8 an this is what came out of it. im pretty happy. there was some adjusting involved like i forgot to cut a slot in the top of it for the latch on the hood to go threw or it will not close all the way and one of the latch springs kept getting hung up on the plate but after everything was fixed works perfect. lemmy see you open my hood :twisted:
