Ghettokracker71 LS/Vturd May 5, 2007 #3 With a big enough hammer,enough duct tape,and some zipties..I'm sure you can firgure something out
dc2GS-R Super Moderator May 5, 2007 #5 It should. My B&M for my G3 fit all 90-01 Teggy's and 88-00 Civics/CRX/ del So and skunk2 single bends are the same across the board as well, so you should be able to make it work. I guess it may depend on which short shifter it is Last edited: May 5, 2007
It should. My B&M for my G3 fit all 90-01 Teggy's and 88-00 Civics/CRX/ del So and skunk2 single bends are the same across the board as well, so you should be able to make it work. I guess it may depend on which short shifter it is
DailyDB8 >>>Honda Enthusiast<<< May 6, 2007 #6 yes it fits, the spacer / bushing is thicker on the civics than integras. <--- Skunk2 Dual Bend
obd1kenobi CI Transfomer God! May 6, 2007 #7 Yeah it will fight! you can over tighen it if you dont have the washer! But shifting will be stiff! But thats how I roll lol!
Yeah it will fight! you can over tighen it if you dont have the washer! But shifting will be stiff! But thats how I roll lol!