some shop pics and head swap.

David.95LS

Delwarian
well had a question about getting the head off a OBD1 B18b, what should i use to get the head bolts loose? thats the last thing holding the head. I removed the cams, exhaust mani, fuel rail/injectors, timing belt, throttle body from the intake mani, the coolant lines, and the dizzy, am i missing anything? ha but heres some pics of the car and of my shop, sorry for the horrible quality its from my cell and its fucked up lol but you get the point.

car in garage with my other toys
http://www.flickr.com/photos/40600520@N02/4405709456/

all the parts together
http://www.flickr.com/photos/40600520@N02/4404946591/in/photostream/

the head still just chillen there haha
http://www.flickr.com/photos/40600520@N02/4404946533/in/photostream/

my milling machine
http://www.flickr.com/photos/40600520@N02/4405709248/in/photostream/

my lathe machine
http://www.flickr.com/photos/40600520@N02/4405709178/in/photostream/

you aint morkin' unless you bleedin' lol
http://www.flickr.com/photos/40600520@N02/4405709100/in/photostream/

and if someone could put the pics in thatd be cool, Thanks
 

Jabes

Member
you need to remove the header and either put a bar on the end of a rachet and break them loose or use a airgun
 
You must log in or register to reply here.
Top