some weird ass shit happened tonite!!

[JCNOOGEN]

why at 1k?

because is my car and i want it to idle at 1k ? lol jk ...the reason why i want it to idle at 1k because i got cams and it idle funny and the sound.. and i rasie it up to 1k

 

[ImElvis]

if you put the clutch in the RPM drops a little.

 

[ixcocoyxi]

if you pump the brakes repetitive and quickly, rpm's will go up too

 

[paoloDa92]

omg same thing happens to me haha

 

[uso_Dc]

how do i adjust idle??

if your idle is above the recommended idle from oem, theres two things.. first check the tension on the throttle cable to make sure that its not too tight, but not too much tension. you should be able to stomp on the gas have the throttle wide open and have very little play in the cable. too much tension will snap the cable..

if that checks out ok then there is a screw on the top of the throttle body called the idler screw. screw this in and out to get the idle at the rpm's that is desired. and if that doesnt work, adjustmen of the tps or the idle control valve will be suggested but special tools will be needed to make sure that you dont adjust too much.

 

[95 JDM DC2]

if you put the clutch in the RPM drops a little.

if you pump the brakes repetitive and quickly, rpm's will go up too

if you push that skinny peddle on the right, the RPM's go up too... just alot faster, so be careful when you do that, something could go wrong :shock:

 

[JCNOOGEN]

if you push that skinny peddle on the right, the RPM's go up too... just alot faster, so be careful when you do that, something could go wrong :shock:

lmao !!!!!!!!!!!!!:lol:

 

[db1love]

gotcha!!!!, the pedel on the right??

 

[ImElvis]

if you push that skinny peddle on the right, the RPM's go up too... just alot faster, so be careful when you do that, something could go wrong :shock:

HAHA! :rolf: