squeaky from clutch

[92_JDM]

I am not sure if other 90-93 integra have this problem or annoyance.
Everything you press the clutch in and out it squeaks? is it totally normal.
is there a way to make it not squeak because its really getting in my nerves
hahaha.

 

[JGvtec]

If you look there are a couple of pins on both the clutch and brake pedal levers. There is one at the very top it pivots on and an one towards the top where it connect to cable clutch. The middle one is a clevis pins. Pull the clip off slid the pin out. Then put a heavy grease like a wheel bearing grease on them and reinstall. The top one is a bolt and nut with some bushings and such. Take this apart and grease everything up. WD40 will only fix it temporarily. Probably wouldn't hurt to put a little grease under where the spring attaches either.

This might help someone correct me if im wrong.

 

[DC_Five_Earl]

Mine squeaks also :what: doesn't really bother me anymore, but it usually happens in colder climates.

 

[Prozon]

There is one at the very top it pivots on and an one towards the top where it connect to the master or slave cylinder.

This might help someone correct me if im wrong.

Cable clutch. No slave/master cylinders for the clutch.

Not a bad idea to grease it. Personally I would just WD-40 that whole area.

 

[DC_Five_Earl]

Cable clutch. No slave/master cylinders for the clutch.

Not a bad idea to grease it. Personally I would just WD-40 that whole area.

Don't use wd40 (water deterrent), because it actually eats the grease that lubricates it. use white lithium grease.

 

[Prozon]

Meh, I get along fine with my WD-40 lol.
But white lithium is in my cabinet too so oh well.