Switching from ACURA to HONDA Badges

ixcocoyxi

RS owner
the ones from these years prelude will fit



for the word 'honda' i got it of a 93 accord from the junk yards, broke off the pin towards the right-end (i believe its near the DA in the word honda) and lined up the left pin to the left hole of where it said 'acura'. i used 3m double sided outdoor tape. no problems falling off.

heres the 'honda' on my car

 

bonspeed

PinoyDomesticMarket
will the civic's H emblem on the trunk fit nicely on the DA trunk hatch? planning to change my badges too...
 

hondacore

New Member
i honestly cant believe there is a topic on here...just buy the new emblems...i promise if you have lived at least 5 years of life, you will know how they work.

stock honda badges have little pegs on the back, but if you just go to your local pep boys and buy them...they have 3m tape, here is a how to:

1) pull old badge off
2) remove new emblem from package
3) remove cover from tape
4) stick on desired location

if you cant figure that out... you should probably find a new hobby.
 
Top