Vertical headlight adjustment

[tork_sd89]

I need to adjust my vertical adjustment on the projector.I found threads saying you need a philips head screw driver but on a team integra thread i found by google search they labled that one as horizontal adjustment :\ I found this thing tho. Is this for the high beams? It's a clear tube with a dial and a spring.

http://www.team-integra.net/forum/blogs/morningz/109-g3-headlight-adjustment.html

 

[tork_sd89]

bump... anyone?

 

[Black teg]

There are 2 screws to adjust your low bean. There's up&down and left&right. You can also use a ratchet and a sock to adjust them, because sometimes the screw driver will strip the plastic you use to to adjust them.

These are the 2 that adjust the low bean on them.

The other ones are for the high beam

 

[goofygamer]

What hid projector is that? It fits right into the integra headlight. S2K?

Edit: OP, is your headlight off of your car? If it's still on there, then the vertical adjustment is right where the arrow is pointing at in the picture on team-integra.

The clear tube is more of a levelling thing. To adjust the verticle, take a philips screwdriver and poke it into the little hole where the arrow is point to. From there, you will see another adjuster.

And if your light is out of your car, then the vertical adjuster will be at the bottom of the light. In the picture provided by Black Teg, you will see the vertical adjuster, at the bottom right of the picture, where the black tube ends at.