XXR 522's 0mm offset on integra?

Gbaby2089

Negative Ned
20 offset is still way too low.

OP if you want your car to drive properly just get some 15x7 +35-43, get some 205/50/15 tyres, drive it, enjoy it.

And XXR 522 look good on absolutely nothing, it is an absolutely ghastly wheel. That EVO doesn't have 522's btw, it only has 6 spokes and the spokes don't extended past the lip, so they are mostly a replica of the ever venerable Volk TE37.

Don't get Konig Imagines/ESM somethings/etc. Get something cool.
 

SMACKABEEZY

F0E D0E M0 H0ES
Gbaby2089 said:
20 offset is still way too low.

OP if you want your car to drive properly just get some 15x7 +35-43, get some 205/50/15 tyres, drive it, enjoy it.

And XXR 522 look good on absolutely nothing, it is an absolutely ghastly wheel. That EVO doesn't have 522's btw, it only has 6 spokes and the spokes don't extended past the lip, so they are mostly a replica of the ever venerable Volk TE37.

Don't get Konig Imagines/ESM somethings/etc. Get something cool.
Click to expand...
if you cant run 20 offset.... yous a pussay!
 

Gbaby2089

Negative Ned
OR

You want to run a proper tyre without rubbing/needing to roll fenders/etc. Or don't want some ridiculous scrub radius.
 


OGstackadoIIa

TEAM LlGHTSPEED RACING
Gbaby2089 said:
20 offset is still way too low.

OP if you want your car to drive properly just get some 15x7 +35-43, get some 205/50/15 tyres, drive it, enjoy it.

And XXR 522 look good on absolutely nothing, it is an absolutely ghastly wheel. That EVO doesn't have 522's btw, it only has 6 spokes and the spokes don't extended past the lip, so they are mostly a replica of the ever venerable Volk TE37.

Don't get Konig Imagines/ESM somethings/etc. Get something cool.
Click to expand...
They're TE's, but that's basically what the OP was asking about, only fake
 

Gbaby2089

Negative Ned
522 is a replica of a totally different wheel. Some weird one that no one has. 7 spoke v. 6 spoke, etc etc etc. And those 'BBS RS' look like Konig Imagine, passing of fake shit as real shit, the ultimate in pathetic.
 


JGvtec

New Member
He always has pms when it comes to wheels. But he has yet to notice that nobody could give two shits what he says. You could do the OP a favor Gbaby and state your response like you did above and move on.

OP If you like them then go for it. I personally think 0 offset is a little much for that specific wheel. I looked them up weather its a 15x7 or a 16x7 you can get 25 offset once you step up to the 8" it will be zero. That way if you wanted them more flush you could get a spacer for them. It would be terrible to get the 0 and find out you had to do so much work to get them to fit.

link for 25 offset on integra

http://hondamarketplace.com/showthread.php?t=2820666
 
You must log in or register to reply here.
Top