Search results

Whaddup. Its been a while since I've been on these forums but I'm going to skip the introduction and tell you the reason why I decided to come back. I became interested in a daily driver after growing tired of daily driving my 06 IS350. I wanted something manual and a lot less on gas. While...

Sorry guys this didn't end well and I made the decision to sell the car. But I just picked up an EF hatch for a price I couldn't refuse and will be making new thread soon for all the support I received from you guys with this one. My EF Hatch...

I already replaced the filter but in the process broke the bolt I'm going to thw dealer tomorrow

The bolt it's inside of is a banjo bolt but still haven't had any luck finding the 10mm

Snapped the 10mm stud that goes over the fuel fliter and now its leaking does anyone know the part number for the 10mm aswell as the 19mm bolt that it's stuck in?

Gonna try that next but I had to buy some pbblaster to put inside the cylinders because the spark plugs will not budge gonna let it sit in overnight and try again tomorrow

Thanks got it out

The majority of bolts on the valve won't come out and I'll have to get it checked out this sunday when I go to the shop There is some type of rybber around the spark plug and its blocking me from getting it out

While prying with the screwdriver should I be able to spin the nut with my hand?

Like this?

I'm trying to remove the valve cover but the nuts are spinning and not coming out any ideas?

Sanded down for the most part but there are still some glossy parts that I'll have to sand by hand Some parts came in earlier today

The timing belt and water pump were both replaced already but I'll triple check just to be sure and I ordered spark plug wires, spark plugs,a distributor rotor and cap, and the intake

Got some more sanding done the paint on the hood was uneven and took a lot of work but the rest of the car should be a breeze

Phillips head screwdriver I might just do that ,

While trying to remove the side molding I stripped one of the screws any ideas?

I had a friend look at it the engine it runs smooth, and the transmission shifts like butter but it hasn't been tuned so I'm waiting for the all the parts to come in and I'll go from there

Yes I have some experience with a spray gun and I don't think anything I do could be any worse

I also picked up some stuff earlier today

He gave me the intake but since I'm not driving the car right now I went ahead and ordered an aem one