98 ukdm itr cluster plug and play on 98 usdm gsr integra?

Joerodc2

New Member
Waiting on a 98 ukdm itr cluster I got from eBay. It's for 98-01 models so it should work for my 98 gsr obd2 usdm integra right? I don't have the original gsr cluster to do the green film method or the guage swap method plus people still have problems. Please let me know!
 

Joerodc2

New Member
Yeah but doesn't the green film have soldering on them? I don't wanna mess up my film on my ukdm one just paid $250 bit pricey but I've been wanting one for a good while
 

XslickwhitetegX

UKDM EXPERT
no its not soldered, its held in by screws 12 or 13 if im not mistaking.
 


Last edited:

drevans_satx

Dylan
I'll preface this by saying I have nothing to contribute to this thread. A ukdm itr cluster in a usdm gsr seems pretty pointless. Wrong mileage on the odo, speed in km/h, and the wrong red line? Just to have the carbon fiber background? Be better off picking up a usdm itr cluster...

Sent from my Galaxy Nexus using Tapatalk 2
 

XslickwhitetegX

UKDM EXPERT
I'll preface this by saying I have nothing to contribute to this thread. A ukdm itr cluster in a usdm gsr seems pretty pointless. Wrong mileage on the odo, speed in km/h, and the wrong red line? Just to have the carbon fiber background? Be better off picking up a usdm itr cluster...

Sent from my Galaxy Nexus using Tapatalk 2
im sure he's referring to the edm cluster. that reads in MPH and RPM go up to 10. also theres a amber film on the ukdm/edm itr cluster (same as the usdm itr) so its a bright amber glow. No need for amber bulbs.

mine cluster is excatly 90 miles off my original miles :D
 


drevans_satx

Dylan
im sure he's referring to the edm cluster. that reads in MPH and RPM go up to 10. also theres a amber film on the ukdm/edm itr cluster (same as the usdm itr) so its a bright amber glow. No need for amber bulbs.

mine cluster is excatly 90 miles off my original miles :D
Lol I'm no expert on that market :) I just read ukdm itr cluster haha.

Also, 90 miles?? DAMN! lucky haha

Sent from my Galaxy Nexus using Tapatalk 2
 

Joerodc2

New Member
Lol yes my cluster reads in mph . 160+ . I have a usdm itr cluster and a 96 spec jdm cluster for sale btw. The gas gauges don't work that's y I was hoping a 98 cluster would work on my gsr without any mods. I know they work because the guage just dies to -e after I turn the needles to F. Tach, speedo, temp, guages work on both usdm and jdm work flawlessly just a dead gas needle. I'm gonna need a gsr film so my ukdm cluster works. Ill post pics if people are interested.
 

Joerodc2

New Member
Thanks for the pic xslick that helps so ill just remove the film and all the gauges would work on all my clusters. I need a gsr cluster odb2!
 
Top