November 10' ROTM - Integraguy04

Integraguy04

CORNER CARVER
1994 Acura Integra LS (197K on odometer)

Engine:
B20B bottom end, GSR head
3" CAI w/ Velocity Stack
Blox 68mm TB
Blox IM
hondata IM gasket
Vibrant 4-2-1 header
test pipe
RS*R Ex-Mag GT II exhaust
440cc injectors
walbro 255 fuel pump
Skunk2 pro series valvetrain
skunk2 pro 1 cams
crower adj cam gears
NRG catch can with valve cover breather kit
Blox cam seal
NGK wires and plugs
ITR LSD transmission
Exedy Stage 2 clutch
engine mount inserts
Raxles stage 2 CV axles

Motor made 200whp and 144tq tuned by Tim at Kingmotorsports.
Best drag strip time is 13.5 @ 102mph
Tuned on Hondata S300

Suspension:
Omni Power Coilovers
Front LCA bushings upgraded (prothane)
Prothane sway bar endlinks
Skunk2 Rear LCA's
Blox front/rear adj. camber kit
ASR rear subframe brace and 24mm rear sway bar
Megan Racing H-Brace
NRG front and rear strut tower bars

Brakes:
Russell SS lines
Brembo rotors all the way around
Hawk HPS pads (street), Hawk HT-10 pads (race -front)
Willwood brake fluid
EM racing Master Cylinder Brace
ARP extended wheel studs
205/50/15 GSR fat fives (street)
225/50/15 Toyo R888 on Enkei RPF1's

Inside:
It is completely gutted
Autopower 4 pt. roll bar with padding
megan racing short shifter
circuit hero extended shifter
skunk2 weighted shift knob
OMP Racerduo seat - FIA certified
G-Force 5 pt harness - FIA certified
NRG black suede steering wheel
Megan Racing c-pillar bar
JVC CD player with 2 infinity speakers

Outside:
Car was completely repained in March 2010 - before it was repainted all the rust was repaired, the right way.
98 spec front bumper conversion
HID kit
front brake ducting kit
ITR wing
APR CF mirrors
VIS CF hood
blox lug nuts












 
Last edited:

BigMac88

Fat guy in a little 'teg
Good to see another road course car/driver on the forum. Are you running R888's? What courses do you run and what kind of lap times do you post?
 

Integraguy04

CORNER CARVER
BigMac88 said:
Good to see another road course car/driver on the forum. Are you running R888's? What courses do you run and what kind of lap times do you post?
Click to expand...
yea i run 225/50/15 R888's and ive ran at blackhawk farms, the autobahn raceway, and gingerman raceway

as far as lap times i dont know cuz i dont have a transponder
 

Integraguy04

CORNER CARVER
endo617 said:
really nice road course car, hoping to be there next summer, so has that b20 vtec feel, did you do anything to the rods and bearings?
Click to expand...
no the bottom end is completely stock...i dont beat on the car regularly really only when im racing...i just take really good care of it...after having it for like 1 1/2 years i prolly put maybe 5-7k on the setup and it does burn some oil but i compression test it every so often and it is still holding strong (and i rev it to 8800)

i got the motor as a b20b from a JDM engine depot so it only had like 20-30k miles on it...i wouldnt doubt in the next year or so that i get rod knock but i mean thats not bad for a nonvtec stock block revving to that high
 

NebulousGSR

Guest
That's a very nice track car you have there. Nice build on the engine :thumbs up
 


You must log in or register to reply here.
Top