Search results

i was tuned on crome on my p28. my bottom end was stock. i had crower stage 2 turbo cam's valve springs, and retainers. t3 super 60 turbo, skunk2 intake manifold, arp headstuds, aem cam gears,

If yall read my threads, i had a 00 teggy boosted. But i blew my block up =(. rod bearing snapped, cylinder 3 piston slapped up and hit my spark plug, and seized my motor, failedd.. I had a head work was done but never did the block. So i am going to build a hatch i just picked up, and have a 94...

Hey guys, i keep blowing My alternator/ Speed sensor fuse under the steering column. I can't find out why it keeps blowing out the fuse. This had gave me an issue before but i had fixed it due to my battery cables. I redid my battery terminals and everything. Now 6 months later it now continues...

but when i do hit fail safe mode or limp mode i can still go past 4000rpms but ill just feel lack of power. This only happens for some reason when my Mph tach does not work.

Hey guys, i change my vehicle speed sensor, and still my MPH gauge does not work, and it wont allow me to go over 4000 RPM. But my RPM on the cluster works fine. I was wondering what were my other options i would have. Any ideas will help thanks.

also guys come to find out i jumped the raditor fan switch sensor it kicked on. so i assume the sensor was bad and i bought the sensor at work. I installed it, and still the fan doesn't kick on. =X

true, well when i put back the motor when i was building it, i put a new water pump, thermostat, and all the working sensor off my old motor.

Hey guys i was just wondering, i start up my car let it idle to operating temp, and my raditor fan does not kick on. I took two 16 gauge wires, connected to the fan str8 to the battery and the fan kicks on. Im not over heating because i let my car run for 1 hour and a half and it did not over...

also for some reason my raditor fan is not kicking on either. I bought new relays and the fuses are fine.. =X

Hey guys i pulled my motor to swap out my block and bulid. i put everything back together but there is just one sensor that i can't find. All i can see is the plug which is almost off and attached to the alternator plugs. i can take a picture if needed. please can someone help me? :(

Hey guys does anyone know the preset on the AEM Cam Gears that are installed with Crower Stage 2 Turbo Camshafts? Advancing or Retarding it back or forth?

never mind guys thanks, lol found how to do it.. such a noob sauce

i just bought a Blox fuel pressure regulator and recieved it today. its the same one as this http://cgi.ebay.com/ebaymotors/BLOX-FUEL-PRESSURE-REGULATOR-FPR-GAUGE-INTEGRA-CIVIC-GD_W0QQcmdZViewItemQQcategoryZ42604QQihZ012QQitemZ220411965449QQrdZ1QQsspagenameZWDVW But how do i bolt it onto...

I want springs that are good quality not to exspensive. i dont want much of a slam for me to crack my oil pan or scrap my front mount.

hey guys i was just wondering i got AEM cam gears at home from a friend. I am going to throw them on my Crower cams. i just wanted to know what were the preset on the AEM cam gears. or does it even matter?

i have a Skunk2 pro series Intake manifold, and i was just wondering what throttle cable bracket i would use. I can't use the My LS one because it gets in the way of a sensor. Please give me some info

hey does any one know what is the bore on a Stock LS throttle body? also if it be ok to use on a skunk2 intake manifold because of short money?

true. well i want to get a good head gasket, arp head stud, and i dont know what kind of cams i want to get. I want a mild turbo cam, but i do not know how to read up on those. Thats all the money i can afford for now. i just want a pretty nice quick daily driver. As of right now all i have is a...

hey guys i just got a new b18b1 block and im putting everything new. im going to boost this b18b1 like mines, but i just wanted to know what kind of head gaskets out there our good. I heard cosmetic was probably only good for all motor. So i was looking towards Apexi, Greddy, Spoon, and HKS. I...

i have have rc440 injectors they are fine. i have msd cap and rotor and wires. how do i check the dizzy?