Search results

Hey Clubintegra, I am trying to figure out if Honda changed the dash style at all in the G3. I have a 95 GSR with the instrument panel part #77100-ST7-A00ZA . I have found some say you can replace it with #77100-ST7-A01ZA. Does anyone know if there actually is a difference in these two parts?

Hey ClubIntegra, I could use some help/advise on my Golden Eagle Intake Manifold install. Here's what I have: B18C1 Lives in Texas will be turbo'd in future The problem/question is the GE intake Manifold does not have an extra line for the Fast idle valve assembly. I have read that it...

I came up with a solution to anyone who has replaced the Passenger airbag with the delete tray. I now have the engine's fuse box relocated underneath the airbag delete tray but I still need access to it. I found 2 inch carriage bolts JB welded them to the underneath of the Carbon Fiber delete...

Been working on a bunch of different things. I decided to go with the Eibach Sportline Pro Damper kit (1.7 inch drop). I may do coilovers later but I am not trying to slam it. I do have a question if anyone has used this kit. I have a huge gap at the damper mounting base. I am working with...

Sorry to hear and see what happened. You are right on the dot with saying "life kind of happening". Good luck on everything.

Just finished pulling Transmission will be sending to Synchrotech to be rebuilt. I have just started the wiring tuck on the passenger side. Just completed pulling ABS system out. Working also on pulling out all electrical for it. [/URL][/IMG]

It seems to max out lean (- - -) right after acceleration then bounces back to the 14's and 15's. Just wondering if it should be doing that?

Hey Guys, I installed a wideband Air/Fuel gauge in a test pipe and was wondering what should I be reading on a 95 GSR. I am wondering if the O2 bung was installed to far back, and I might be getting back pressure from the exhaust. I am rebuilding the transmission right now and was thinking of...

Well, I have done a bunch of research and have decided to tap the thermostat hosing. I used a 1/8 tap and plan to use Hondabond HT on the threads to ensure no leaks here is my install of the temp. sender will update more once installed. Wanted to find the most useful spot and still hide all of...

Here is one of my ideas I am looking at but its going took pretty ugly. Has anyone used any of these adapters on the return line to the radiator. My idea is that it would be lower so less of an eye sore. I still think the thermostat hosing is the best idea. Has anyone done a temp. sender there...

Hey ClubIntegra, I am needing some input on what to do. I have an AEM 30-4402 Water temp Gauge I am about to install. My problem is where to put the Temperature sender. I have seen some install on thermostat housing, and some using a water neck adapter. Trying to find a clean install I hate...

"][/URL]

"][/URL]

Since my last post I have installed Hasport left, right and rear engine mounts. All of the factory mounts were shot after installing car was alot smoother on idle. The rear mount is a nightmare to get in. I have also added 3 piont tower bar from password JDM. I also got rid of the cheap ass air...

Here is a picture after I retro fitted the bracket from up and over.

Been working alot and saving up for parts and transmission work. I have finished pulling ou tthe AC and put in the replacement evaporator box (79810-SR3-A01). I have started to do a wiring tuck but I am going a different direction than most. I decided not to pull the wires through the drivers...

Make sure you buy some High quality ones. Ballasts tend to burn out quick on the cheap ones. I have some in my everyday driver. I like them but the are twitchy in cold or rainy days due to the humidity. I will not do them again though, but thats my two cents.

The best dash kit on the market is going to be Metra 99-7898 it works for almost all Hondas up to about 2006. Are you planning to go single din or double din? Double dins tend to look closer to factory. Bes Buy sells these kits and it comes with both for about $20.

One other possibility is your hood switch is not functioning properly. If you have one try unpluging it and make sure that wire is not grounding out. Viper 5704V The remote start will not activate the remote start 1. Check remote startup diagnostics. 2. Is the neutral safety switch plugged in...

Sounds like it could be back in manual mode, or your neutral safety swith could be turned on.