Search results

Ok so my b18c1 limits at 7300. Should be 8 to 8200. What's the deal?

Might be getting a free k20 (normally $2500). No comp piston #4.

Gonna be buying a set of aftermarket cams. Skunk 2? Blox? Toda? Other brands? Pros and cons? Whats needed in conjunction with them? Thanks in advanced.

Besides club integra, password jdm, where is a good place to buy perf parts?

Are these adjustable lifters? Still have a lifter tick. Pretty noticeable.

b18c1 no oil pumping through head. found the black box on the back of the block leaking oil. not a lot. so lost!!!!

So I just installed my fresh c1. Plug everything in. Go to start and nothing. No crank. Try to jump the starter and the fan kicks on and no crank. Pulled starter and bench tested. Checks out good. The fuel pump primes. Click under dash and click under hood (relay). No crank. There is/was an...

Ok, so I bought my car a few months back with a blown engine (grenaded 96 c1). Bought a 95 c1 block (nothing on it). My understanding is the 95 c1 had an oip cooler and the 96 c1 didnt. Well I forgot to pull the filter stud on the 96 c1. My question is, if the 95 had an oil cooler, does it...

What studs are interchangeable? Previous owner stripped the bolts. Need a whole set.... thanks

I have an opportunity to buy an itr(type r) block with mains and girdle from a jdm 96. Will my crank from my blown b18c1 work in it? What about the head? Pistons? Or just by all the pr3 internals and head?

I just bought a 96 gsr with a b18c1. Piston broken. I have a 92 b18a1 out of an ls. Can I swap it into the gsr til I get the 18c rebuilt? Also, what will I need? LS ecu? Mounts?

where is this elusive relay located?

hey guys, well, it happened....i bottomed out a few weeks ago. computer is throwing a code for fuel delivery. i smell raw fuel after fueling and while driving. cant find any leaks. i know its somewhere cause now every so often of letting of the throttle and barely being on the pedal it will act...

ive searched and searched, yet nothing comes up about this. will they fit with or with out the mid shaft? reason for asking is i have a 90 SI prelude as a parts car for my other 90 SI prelude. my DA9 pass. axle is toast and i have a good prelude axles. im pretty sure the mid shaft bolts up...

hi, im new to rebuilding transmissions. i did it myself using a few guides on the internet. here is my issue. 1,2,3,5 shift fine.....4,R are really hard to get into. now before you ask what fluid and all this. the trans is empty due to me having to remove the trans to fix the shift assembly...