joshuathewolf
Broke but no Joke
ok.. I have a 93 civic lx with a b18b1 (Ls) engine. I want to put in sway bars and also get all 4 disk brakes for the extra stopping power.. in trying to research this I have learned;
- this is probly the right gen integra to pull from.
- I may need the proportioning valve.
- I need rotors and calipers..
- may need spindle/steering knuckle?
- may need master cylinder/booster.
- for sway bars i'll need control arms (pre-tapped for sway bars) but dont know which are compatible.
- need a different e-brake cable but i dont know which.
- I think all the lines are good?
- this swap is not often done (at least documented online) to lower model civics because all i can find are write ups on the EX which is, as I understand, completely different.
Anyone who has done this or knows any of this or even where (specifically) to find this info, your input is much appreciated!
Thanks in advance.
- this is probly the right gen integra to pull from.
- I may need the proportioning valve.
- I need rotors and calipers..
- may need spindle/steering knuckle?
- may need master cylinder/booster.
- for sway bars i'll need control arms (pre-tapped for sway bars) but dont know which are compatible.
- need a different e-brake cable but i dont know which.
- I think all the lines are good?
- this swap is not often done (at least documented online) to lower model civics because all i can find are write ups on the EX which is, as I understand, completely different.
Anyone who has done this or knows any of this or even where (specifically) to find this info, your input is much appreciated!
Thanks in advance.