DB7/8 LCA's and Lower Tie Bar HELP!!!

[nugget]

just go to ace and buy a short piece of pipe, cut off 3/4" sections and space it out, from the pic i don't see why that wouldn't work

im worried that the bolt for the control arm will be too short and not torque to the appropriate length it needs to.

Did you preload the control arm before torquing the bolts in the LCA down?

Thats usually the reason why they fail, improper installation.

If you can, just move the ABS line out of the way.I dont think moving it from that location will affect it at all.

im not too sure how i would go about moving the ABS line. its mounted to a bracket thats in the way ( its behind the tie bar in the picture) if i do move it.

 

[nugget]

would anyone know if they make a LCA bolt that is about 3/4" longer?

 

[r0g3r16]

Do u have to add a 3/4 piece of pipe or could u just leave it high like it is in the picture?

 

[nugget]

i took it a step down from where the sway hole mounts up to. if i use a 3/4 pipe to clear the line, i would need a longer LCA bolt which i have never seen before.

here it how it sits right now. leveled with my LCA's.... it should be a step lower.