fastshadow171
New Member
ok so i have been looking at some wheels i and did search and researched it.. so im looking at getting a set of ether 15x8 +20 or 16x8 +20 and im trying to figure out what kind of work im going to need to make these work. like i know im probally going to need a roll will i need pull ? and anything else i need to have done? any help is appreciated.. and does anyone have any pics of a 16 or 15x8 +20 installed.
i have about 1-2 finger gap with drop i have now. and im running ground controls with koni yellows and extended top hats.
i have about 1-2 finger gap with drop i have now. and im running ground controls with koni yellows and extended top hats.