You know this is my first integra. Never owned a Honda. Only owned a lancer, mustang, and f-150. So not knowing were the pump is ain't that big a deal. As for the main seal I guess that's the one where the flywheel is?Dude.... I can't do it anymore.. sorry bro. Search or sumthn man, put in a little more effort if you want anybody to help you.
Done. It took an hour and a half and I let the oil resistant silicone dry 3 hours.Don't tighten it too much. And make sure it doesn't pop in or out while you are tightening the bolts.
It turns out it's my crank and cam seals!!!Jeez why so long?
Haha alrighty... have fun with that.
I'm not doing it. I'm taking it to a shop. And I did check them, like 10 times but could never figure it out because the oil would drain around the oil pan. Its gonna cost like $1100.00 to fix these 3 seals!!!Didn't we tell you to check those long time ago!! Clearly it was near the crank but can seals were a surprise. Hope you got impact gun to take those can seals off
Posted by Thunderbolt using tapatalk
My biggest problem is messing up the timingDude.... cam seals are cheap as fuck. If u can't pull the gears then get a damn helms book, take cams out. Swap seals... not rocket science. It can be fixed for well under $50. But if u must get raped by a shop, be my guest.