ok h22 is a prelude vtec motor, dohc stands for dual over head cam, dc5 is the chassis code for the acura rsx, whp stands for horsepower at the wheels, a stage one clutch is a slightly stronger clutch then stock its almosts the same as stock tho, i/h/e stands for intake, headers and exhaust, torque can be explained as many different things but im just gonna put it this way torque makes you burn out as it was so greatly explained on hot rod tv, a header is a part of your exhaust it is used to replace the heavy exhaust manifold with a lighter weight better flowing unit, a cat back is an exhaust that is mounted from the end of the cat all the way to the back of your car takes the place of the factory pipeing and muffler, a camber kit is used when lowering your car so you can adjust your camber to a more usable area so you dont burn the inner edge of your tires, a short shifter is a shift handle that shortens the throw or travel of gear changes, psi is pounds per square inch i think but it basically stands for pressure like in your tires or in a turbo those types of things, dynoing a car is done for a few reasons two of the most common is finding out how much power your car has and also to help tune your car. sorry for the long windedness and im sure not all of this is right but thats just how i think of it as lol