nine78guy
New Member
aye clubintegra, some of you may know me, some may not. I'm "KONERRI's" younger brother. his build thread if you havn't seen it, which i'm sure most have: http://www.clubintegra.com/board/showthread.php?t=11495
I havn't been active much on this board, but i was a long time member of clubcivic for years until my coupe got jacked. since then i've taken over my bro's s2k and recently i just picked up a 95 BG-33P gsr as a winter beater/side project. NO RUST FTW!!!
I havn't been active much on this board, but i was a long time member of clubcivic for years until my coupe got jacked. since then i've taken over my bro's s2k and recently i just picked up a 95 BG-33P gsr as a winter beater/side project. NO RUST FTW!!!
the coupe then:
the s2k now:
Trying to save this SIR JDM front integra from going under. car had no lip, no grill and on stock suspensions/fat five gsr's. first thing on the list was replacing the brake pads and resurfacing rotors. Slapped on a new set of Hawk pads my younger bro had laying around. Second, i couldn't stand these jdm chrome housing, so i decided to replaint the housing black. halfway through, i decided to retrofit some
fx35 BI-xENON projectors into these headlights as well. non-hid sir jdm front FTL.
fx35 BI-xENON projectors into these headlights as well. non-hid sir jdm front FTL.
bi-xenon projectors came from these:
projector:
wired up:
low beam:
stock lense, thinking about a tfx lense conversion then again, i might just keep it like this.
taking them apart:
forgot to take picture of mounting, cutting and trimming the headlight and projector together, but here it is mounted:
turned on:
lense placed back in place, but not glued:
*dirty lense*
left & right comparison:
random:
picture of the PAINTER:
younger brother
konerri himself
only shot i have of the engine bay, covered up by headlights
currently working on the right side headlight now. will try and take detailed pictures and hopefully do a write
up of some sort on the bi-xenon retro.
will update as i progress.