Is the plastic grommet already there or do i have to buy one and i drill the whole threw the inside of the car or the engine bay? because threw the engine bay i cant see itIf you have a 5 speed with a/c you don't have any rubber grommets to poke through. There's a spot on the passenger side to drill (make sure you use a plastic grommet). It's where the slanted part of the floor board meets up with the verticle part firewall, near the ac evaporator / blower motor. Cut the foam to reveal metal. Sorry I don't have pics. Space is large enough for one 4ga wire.
I probably never saw it because it is so low in the bay, so that means its below the brake pedal?Dago, I have air conditioning and a five speed.
There is a rubber plug under the master cylinder on the drivers side. Cut a hole through it. :thumbs up
Just remember, if you move the battery to the trunk. You will have to run the wire to the front. So you still need to find/drill a hole.move the battery would be the best choice but the hole cutting sounds easier