annauyt
New Member
Okay so I have a 96 special edition integra. Have soft brake pedal, the car brakes but I have to push the pedal down hard. Also ABS light comes on i'll have to check the connectors on the wheel speed sensors. Sometimes the abs light will go off. Anyways I did bleed all 4 brakes, still the same thing soft pedal.Also before bleeding I did check the fluid level and it was right on target. So I looked around master cylinder and there was some paint comming out with little bubbles around the master cylinder on the brake booster. Before I take the MC out is there anything else I should check? Front brake pads life is about 80%, rear is 70%