It sounds like squeaking from the back right and left when go over anythingDid you use and old mounts or anything like that?
Try to pin point which one is making the noise and whether or not it's upper or lower.
Then look at the area to determine whether it's metal on metal or rubber rubbing on metal.
What does the noise sound like?
The knock comes from the back right and leftSqueaking could be normal from the bushings. If the knock is coming from your front end, you're probably hitting your bump stops on the shock tower
Should i spray the bushings with the silicon spray or whatever? Does the bolt on the very top have to be tightened as much as possible1. Check your bushings.
2. Make sure that everything is tightened correctly.
There is a torque spec it is suppose to be set to, but i forgot. Just tighten it until its pretty snug. Thats the best advice I can give without spending time finding the torque spec, which you can do. Squeaking is likely old bushings, or if you have prothane style bushings, those squeak regardless.Should i spray the bushings with the silicon spray or whatever? Does the bolt on the very top have to be tightened as much as possible
Theyre stock bushings, so il just tighten the top mount a little more and spray it downThere is a torque spec it is suppose to be set to, but i forgot. Just tighten it until its pretty snug. Thats the best advice I can give without spending time finding the torque spec, which you can do. Squeaking is likely old bushings, or if you have prothane style bushings, those squeak regardless.