no its front, sry for not specifying.. um i think the sleeve is seized cause it moves the sleeve on the inside and i can see it spin, will i need to get a new mount or what?If he has removed the top mounting nuts it should be free hanging. It probably is seized, and you may want to take out the lower control arm along with the strut. It is the back you are having trouble with right?
i tried pushing it and spinning it.... its like on there good lol, all my other ones come off easy except that one, and im pissed cause i cant run 3 coilovers and on stock hahaPut an impact gun on it. When it's come out a little, stick a wrench in there and push it out while blasting on the impact gun
lol, that sucks, but it still wont push out cause the end of the bolt isnt the problem. its siezed to the sleeve on the insideyou'll prolly jus have to cut the bolt off with a cut-off wheel. get a new one! thats what i had to do with my rears, and also what i still have to do with my fronts haha yes im riding with lowering springs on the rear and not the front.
yea its front and its the bolt at the bottom of the fork. sorry for not being specific, im just discouraged cause i cant drive it cause somehow i broke off two lugs on front pass wheel, so i cant drive it, it blowsssssSo it's the front. Is it the bolt at the bottom of the fork? Or where the shock meets the fork? I'm not quite understanding which bolt you are having issues with.
yea im pissed. im getting flooded with work this week lol, replacing front bearings and lugs....coilovers....everything is breaking while im trying to do it...wtffffoooh this happen to me! ya impact gun ftw and some pb blaster breaks everything apart! and a crow bar to pry it out a really really big crow bar lol! and suck about the lugs