92 integra problems HELP.....

[MiDWeStiNtEgRa2]

ok i have a 92 integra
obd1 motor with obd0 harness and head *i was told*
thats what i recently swapped in...
but im having problems with the car because
it cuts off

many people are having this problem too
but no one seems too know what it is?

my car run fine but it bogs from time to time
and it also only revs up to 4000 rpm
it doesnt go any higher?



MOTOR
b18a1
i got headers, and n1 exhaust all the way back
cold air intake
stock ecu
and thats about it

i was told that when it was swapped out it had two plugs in the back
but the harness only has one they said*maybe the knock sensor*?


WHY IS THAT? IF YOU KNOW PLEASE HELP.....
IF YOU NEED MORE INFO ABOUT MY CAR LET ME KNOW
SO YOU CAN HELP

 

[imcnblu]

if the car is a 92, but the motor is OBD-0, and none of the necessary conversion was done to make it run right, then the ECU is the culprit. the stock 92 ECU is OBD1, where as the motor you're using is a claimed OBD0.