94 integra rack and pinion replacement

[bross7]

Hey guys ive searched and cant find a good writeup on how to replace rack and pinion on a 94 integra.so far ive taken the tie rod ends off the hub removed the four bolts holding in place and tom gonna drain ps fluid and disconnect the hose and connector but what all has to be removed in order to remove the rack?

 

[xZachTheRipper8]

it should just be that easy, I haven't done one on a integra yet but just disconnect the lines, removed the tie rod ends, unbolt the mounting brackets and it should slide out either side. I know some cars require you to drop the subframe to get it out and then some you can remove the front wheels and wiggle it out through the wheel well. best of luck!