Aftermarket Air intake probs

zero_dohc

New Member
Alright just installed a short ram intake on my Honda DOHC non v-tec engine. I got it all installed right but there is 2 hoses that came from the stock intake and I can't fit both of them onto my aftermarket one because there is only one spot on my aftermarket intake. The hoses are skinnier than the bigger one. One connects to something on the throttle body and I believe the other connects to something similar on the Intake Manifold. I might be wrong. But should I get something to connect the 2 hoses to that one spot on my aftermarket intake pipe?
 

evan2

New Member
ok there should 3 extra lines,
one would go from the vc to the intake, if you have a hole then put that line there..

though i would say get a breather filter and attach it to the vc, and just plug the hole on the intake all it does it throw gunk onto the tb plate

the other 2 lines you should connect together some how, it sends coolants to the iacv to warm it up
 
You must log in or register to reply here.
Top