Axle complications..!!

Shadowwolf

Shadowwolf_DA9
Alright, I drive a 91 da with B20b swap with a 5 speed A1 tranny. I replaced my axles with 95 gsr cv axles, but they appear to be a little short. The passenger side axle fits and I'm able to use that.

Driver side axle: compressed length of 22 3/16"
Intermediate Shaft: Female adaption

The distance from my hub to the intermediate shatf is roughly bewteen 22-24 inches.
When I installed the driver's side axle it hook up and seemed fine. But when i moved my car the shaft came out of the inner housing. (The housing containing three bearings)

Are there other Cv Axles that are a little longer and compatibe with my da or could there be a slip up on my ended not allowing it to work?
 
Top