Car wont start, no dash lights after radio install

[b20baby]

Clicks doesn't mean the battery is good...what voltage reading does the battery have

12.6 volts

did you blow a fuse?

i checked all the fuses in the engine bay none are broken and read 2 to 3 ohms each. I want to check out the ones under the steering wheel to the left but i dont have time until Monday...

The video i posted should help

 

[b20baby]

I would try to get it to start then worry about the lights(unless related)

Fuel pump priming?

Check for Spark

You said it starts to turnover after a few clicks.
A "click" or "click-click-click" means the solenoid is trying to grab and hold, but it can't. If it can't, the motor can't turn, since it gets its current through the connected solenoid. A solenoid that won't grab is either defective or the battery is too discharged to allow it to grab.

Check the Starter

GL

Oh and check your battery cables/terminals

Im almost certain the lights are related; these two symptoms came up at the exact same time. Ill just tow it to a shop cause i simply don't have time to do all this, and this IS my DD i need it fixed asap

 

[TeggyRussE]

Im almost certain the lights are related; these two symptoms came up at the exact same time. Ill just tow it to a shop cause i simply don't have time to do all this, and this IS my DD i need it fixed asap

Oh well good luck to you sir

 

[b20baby]

SOLVED

Found a bad sauter that previous owner did while installing the Clifford alarm. Re-did the connection and started right up.